How To Design and Mock Up Enamel Pins

How to design enamel pins mock up

Most people think that making your own enamel pins requires you to be (or hire) a great designer or artists. It doesn’t. I’m not a designer, an artist or even that good at drawing, but I’ve been making and selling enamel pins for years, and so can you.

In this article, I will break down the three most important elements of the pin design process (if you want to know about the whole production process, check this out).

First, the essentials of enamel pin design, second, the factory requirements and how to prepare your design for production, and third, some tools that might help you along the way.

The essentials of enamel pin design.

If you’ve never designed an enamel pin before it’s important to understand the limitations (and benefits) of the medium in order to create artwork that will translate well into pin-form. In comparison to traditional designing on paper (or digitally), in which you can use any lines, colors, details or shading that you’d like, the enamel pin production process imposes the following limitations:

All colors are delimited by lines: Because all pins are made from metal molds, the epoxy paint used to fill-in the colors can only be applied to sections that are delimited by metal. Every black line in your artwork will be a metal line in the production process, so it’s important that all colors that you apply are delimited by lines in your design.

How to design enamel pins pin colors production

Thin and intricate lines do not translate well: Clocking in at around 1-2 inches in size and made out enamel (which doesn’t facilitate intricate work) pins are a small canvas to work on, so unless you’re a super experienced designer and producer that knows the intricacies of pin materials and production capabilities of a pin factory, overall, you should try to create designs that are simple, with bold lines, strong colors and no shading.

That is because the more detail and thinner lines you include in your design, the more likely the lines are to blend together in the production process (which will end up looking like a crappy pin) or the larger you’ll have to produce your pin, which will make it a lot more expensive and inconvenient for the customer.

How to design enamel pins good and bad mock ups

The design on the right has complex thin lines and shading. It will not translate well into a pin. The one on the left is the same design but simplified using strong bold lines that delimit all colors.

Pricing is based on pin size, not the number of colors or lines: When thinking about or preparing your pin design, it’s also important to take into account how factories will price your design. Overall, pricing is based on the size of the pin because it requires more material and work, NOT the number of colors or lines (which a lot of people assume dictates pricing). This means that if you want to start off with a small investment (and if you’re just starting, that’s a smart move), you should aim to create a pin design that is simple enough to comfortably fit into a 1-1.5 inch pin.

Having a larger pin will not only increase your costs but also limit your potential market since most people won’t be able to put a 2-3 inch pin on their lapel or jacket.

how to design enamel pins pin size mock up pin design

The requirements and tools to mock up an enamel pin design.

Okay, now that you know the limitations of the enamel pin medium, what will a factory require from you to produce a design? This one is simple. All they’ll need is a high-quality PDF of the design and the size you’d like it to be. That’s it :)

There are two main ways of preparing your design.

Hand draw your design and turn it into a PDF: If you don’t have experience with digital design software, or just prefer to draw something by hand, you can mockup your design on paper and scan it in order to make it into a PDF file. Although not ideal, most factories offer bare-bones design services and will transform your sketch PDF into production-ready artwork. 

Heed with caution here, more likely than not it won't be high-quality artwork and that may have a negative impact on the final product.

How to design enamel pins pin mock up hand drawn

Use digital design software: If you know your way around one of the many graphic design software options out there, this one will be a breeze for you. All you’ll need to do is generate the digital design and export it into a PDF.

Once a factory receives your PDF and the size that you’d like it to be, they’ll translate it into an enamel pin production mock-up that looks like this:

How to design enamel pins factory production mock up

 This is called a production "proof". 

If you want to go the extra mile, you can include the exact Pantone colors that you’d like your factory to use. If you want to go this route, be warned, the production process changes certain colors and factories don't always have the widest range of colors available, so unless you know what you’re doing, it’s best to allow the factory to guide you in terms of which colors will get your pin as close to the original design as possible.

Some tools that might help you along the way.

Like I mentioned previously, I’m not a designer or artist and I have no clue how to use photoshop, so to avoid the risks of only using pen and paper, I decided to make a small investment and buy myself an iPad pro + pencil and the Pixelmator app. This made it super easy for me to sketch my design ideas quickly and be able to produce pins more often (you can get “Apple store” versions refurbished on Amazon for less than half the price!).

How to design enamel pins pin mock up design software tools

I can only speak from experience, so that’s what I’d recommend if you want to take your pin design endeavors seriously and you lack design skills, but there is definitely a bunch of other tools in the market, like Procreate, Photoshop, Illustrator or Sumo paint to name a few that can also facilitate your design adventures.

Whatever you choose, the principles of design will remain the same. And don't forget, work with your factory, be patient and build a friendly relationship with them.

They can and will be your biggest ally or a headache depending on how you view the relationship. 

You're all set! 

Thanks so much for reading this article. If you found it helpful, please share it with your friends! It'll help more people see it. 

Also, if you're interested in building a better enamel pin business, you can check out these articles as well :)

- How to make enamel pins. 

- How to package and ship your pin sales. 

In case you're wondering about the pin-selling part, here are a few essential articles that will help you understand what you need to do to sell them on Instagram contact me

By the way, if you want to dive deeper into other strategies and systems to grow your Instagram faster, read these articles on how to grow your Instagram without buying followers. Then, you can tackle the following: how the Instagram algorithm workshow to make money on Instagram, the best Instagram botswhy your Instagram account isn’t growing, how to create effective Instagram story adshow to create a visually appealing Instagram gridhow to increase your Instagram engagementhow to find the most valuable Instagram influencershow to measure what an influencer is worthhow to measure your influencer marketing ROI, and how to reach out to influencers.

That should give you a good place to start, but if you need more help, always feel free to DM me on Instagram @pinlord. I'm testing out new pin factories all the time and I'm happy to share them :)

Back to blog


Hi! Your blogs are so helpful. Thank you! Do you know or any programs that make design easier? I appreciate your time and advice:)


Any advice on finding a manufacturer? I’m apart of a pin group on Facebook, and so many people seem to have a lot of problems with their manufacturers… I’m only just diving into pins, and this scares me. Hah.
Thank you for all the advice, definitely feel a little more confident in creating pin designs.


These blogs are crazy good, so so helpful! thanks ♥


Can’t tell you how grateful I am for finding your extremely thorough and useful blog posts! Thank you so much for this!!


If you have a pin that ends up being a huge success I’m assuming you would then make larger order with the pin makers in China. If they think your pin is selling well what’s to stop them from selling your design to Alibaba? Also, if the pin makers think you are selling a lot of a design do they ever try to up the price per pin on reorders?



Leave a comment

Please note, comments need to be approved before they are published.